View CA12891STRADA-SQ-VSM_7315398.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5
product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status ca13509_strada-sq-t2 strada-sq assembly luxeon m black 25 x 25 mm 8.7 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 93 % 0.600 available we recommend a minimum center to center spacing between strada-sq-t2 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13688_strada-sq-t3 strada-sq assembly luxeon m clear 25 x 25 mm 8.4 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.500 available we recommend a minimum center to center spacing between strada-sq-t3 lenses of 30mm (edge to edge spacing >5mm) to ensure the best optical performance. ordering number family type led color diameter height style optic material holder material fastening status ca13758_strada-sq-fs-np strada-sq assembly luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asym degrees 92 % 0.900 available ordering number family type led color diameter height style optic material holder material fastening status ca13897_strada-sq-fs strada-sq lens luxeon m clear 25x25 mm 12.6 mm square pmma - - ready fwhm efficiency cd/lm gerber file asymmetric degrees 92 % 0.900 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 1/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 ordering number family type led color diameter height style optic material holder material fastening status c13866_strada-sq-cy strada-sq lens luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status ca14219_strada-sq-cy strada-sq assembly luxeon m clear 25x25 mm 10.1 mm square pmma - - ready fwhm efficiency cd/lm gerber file 120+115 degrees 94 % 0.410 available ordering number family type led color diameter height style optic material holder material fastening status c12727_strada-sq-vsm strada-sq lens luxeon m clear 25 x 25 mm 6.8 mm square pmma - screw, pin, glue ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available ordering number family type led color diameter height style optic material holder material fastening status ca12891_strada-sq-vsm strada-sq assembly luxeon m clear 25 x 25 mm 6.95 mm square pmma - screw, pin, tape ready fwhm efficiency cd/lm gerber file 154 degrees 93 % 0.250 available december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 2/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 3/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet strada-sq series last update 15/11/2013 general information - product series especially designed & optimized for luxeon m series of leds. - special care taken to make light distribution as uniform as possible. - lens material optical grade pmma with high uv and temperature resistance (105 degrees of celcius / 220 degrees of fahrenheit). allows use of high current and temperature conditions. please find more information about used material from below: http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20ul94_yellow%20card.pdf http://ledil.fi/sites/default/files/documents/technical/material/pmma%208n%20plexiglas-datasheet.pdf - fastening to heat sink with a pu foam adhesive tape of automotive grade. please find fastening details by clicking link: http://www.ledil.com/datasheets/datasheet_tape.pdf - fastening to pcb with appropriate adhesive. by clicking link below you can find ledil recommended glue options. http://www.ledil.com/datasheets/datasheet_glues.pdf note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. note 2: assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. slanted assembly might cause unbalanced bond to the surface. all surfaces where tape is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer - this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. note 1: we advise customer to ensure the suitability and sufficiency of the bond in the end product. for example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. note 2: all surfaces where glue is applied must be clean, dry and free from grease and dirt. if cleaning of pcb surfaces is needed, please follow strictly the cleaning instructions of your led manufacturer -this is important as cleaning shall under no circumstances damage leds or other electronics components on the pcb. further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. december 5th 2013 17:03 copyright ledil oy - subject to change without prior notice - page 4/4 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 tape beam direction a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 3:2 weight - sheet 1/1 size a4 drawing title strada-sq-t2 datasheet part number - ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." 8.6 2 front view a 25.4 c/c 21.5 c/c 3.2 2 bottom view 25 25 top view isometric view 0.15 detail a minimum spacing 30 c/c 5

▲Up To Search▲

Price & Availability of CA12891STRADA-SQ-VSM

	To Download CA12891STRADA-SQ-VSM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .